Rust Removing Ultrasonic Machine From Metallic Parts Asted Parts / Gun Parts

Basic Information
Place of Origin: China
Brand Name: AG SONIC
Certification: CE
Model Number: T-36S
Minimum Order Quantity: negotiation
Price: negotiation
Packaging Details: 1unit/wooden case
Delivery Time: 15 working days
Payment Terms: T/T
Supply Ability: 300units/month
Tank Size: 600x500x450mm, Customized Available Ultrasonic Power: 1800W
Heating Power: 4.5KW Control: External Generator, More Stable
Optional: Oil Filter System, Pneumatic Lift, Rinsing Tank, Etc. Warranty: 1 Year
High Light:

ultrasonic auto parts cleaner

,

ultrasonic automotive parts cleaner

 

38L 40KHZ Electronic Assembly Cleaning Electronic Board Ultrasonic Machine
How an ultrasonic cleaner works to clean Medical Device

special solvents designed for cleaning Electronic Board can be utilized however very good results can also be obtained by using water and an environment friendly low pH cleaning agent. Low pH or excessively high pH chemicals should be avoided. These aggressive chemistries in combination with heat and the ultrasonic activity can potentially cause damage to delicate pieces.
In the cleaning process, Electronic Board are submerged in the cleaning solvent. The intensity of the cleaner as well as the heat of the solution should be adjusted to successfully engage the application. Ultrasonic cleaners work quickly to completely remove dirt and other contamination through a cavitation process.
Electronic Board is cleaned in the same way as other items. Electronic Board are submerged into a gentle solvent and the cleaning process sends ultrasonic waves through the solution which creates bubbles that clear away all dirt and grime clinging to the jewelry’s surface. In most cases a short two to three minute cleaning is all that is required for optimum results.

Benefits of cleaning Electronic Board with an ultrasonic cleaner
• The process reaches parts of the Medical Device that are extremely difficult to clean with traditional cleaning methods.
Medical Device gets completely clean, leaving it looking brand new.
• No need to disassemble the jewelry.
• Multiple pieces can be cleaned at once, saving time and money. Follow manufacturer recommendations for maximum pieces in your ultrasonic cleaner.
• Gentle cleaning does not damage delicate pieces and allows for cleaning as often as necessary.

Steps to cleaning Electronic Board with an ultrasonic cleaner
1. Fill chamber with cleaning solvent
2. Note that water must be hot. Ideally, you would use an ultrasonic cleaner with a heater.
3. Run a pre-cleaning cycle
4. Submerge Medical Device into cleaning solvent
5. Run the cleaning cycle
6. After the cycle is complete, remove the items from the parts basket and rinse the solution from the items
7. After rinsing brush the pieces with a soft-bristled brush. Paying special attention to brushing around the claws and crowns that hold the gemstones or diamonds in place.
8. Complete with a final rinse. Place the jewelry in w

 

Applications:

 

Industry Items to clean
Moulds

Plastic tool models

--For cleaning.

Electronics

Relay—remove metal filings and impurities,

Potentiometer-- impurities and oil stain on moving contact,

Vacuum tube parts-- Dirt and impurity on the polar plate of electron gun,

Semiconductor element--Dir on the surface of silicon wafer and crystal wafer,

Capacitor--Dirt on pins of capacitor,

Printed circuit board--Ink and oxide left during processing printed circuit board,

Magnetic head--Dirt on the surface of the magnetic head.

Mechanical

Bearing, gear--Metal filings and impurities left during the processing of internal and external sheath of bearing,

Spring--cleaning before spring turning black,

Vernier caliper, measuring tool--Metal filings and oil stain left during the processing of parts,

Oil choke, oil pump--Metal filings and dirt left during the process of inner hole of oil choke and oil pump,

Screw rod, air valve, pneumatic elements--Iron filings, cutting oil and abrasive left while processing.

Automotive,

motorcycle, aircraft

To remove oil, grease, preservative, plastic residue left during mechanical cutting, grinding abrasive, glass fiber, dust, graphite and tar from Automotive air valve, glow plug, gasification plug, fuel pump, piston ring, battery terminal, machine control hand-wheel, motorcycleair-valve,etc.
Armurerie

weapons cleaning, such as guns, rifle, bullets , handcuffs, etc.

--For cleaning and lubrication.

Printing industry

Rotative machine,

metal plate,

Printer ink head,

printer cartridges

-- To clean ink, oil and dye on the surface of printing machine & parts.

Repair industry

Musical instrument repair shop, vehicle maintenance shops, motorcycle repair shop, mobile phones & interphone repair shop, gun repair shop, etc.

--To clean dirt, impurity and oils from surface of tools and spare parts.

Watch & clock

Gear wheel, pin, screw, movement of watches for watch manufacture, repair shops, Watch collectors, etc.

--For cleaning.

 

Model: AG-120ST details:

Model T-12S  (digital timer&heater, Power adjustable)
Capacity 38liter
Tank size 500×300×250mm (LxWxH)
Unit size 640×440×470cm (LxWxH)
Packaging size 740x540x570mm (wooden case)
Ultrasonic power 240~600W adjustable
Heating power 1500W
Timer 1~99mins adjustable
Heater 20~80C adjustable
Frequency 40,000Hz
Power supply AC110~130V, AC 220~240V, 50/60 Hz
Tank material SUS304, 2mm thickness
Shell Material SUS304, 1mm thickness
Others With drainage, basket, lid
N.W./ G.W. 51KG/ 72KG
Warranty 1 year& tech support for life

 

Features:

  1. Tank materail is SUS304 with 2mm thickness, Human hand argon welded, Sturdy and durable resistance to high tempearture
  2. 50W industrial transducers, outstanding cleaning effects
  3. Built-in generator
  4. Power adjustable, choose different power according to different cleaning objects
  5. Digital timer: 1~99mins timer adjustable. continious working for long time.
  6. With memory function, no need to reset time and temperature every time.
  7. 20~80C adjustable, powerful heating panel, faster cleaning
  8. Industry use power cord, more safer.
  9. Can bear 100~200KG cleaning objects
  10. Accessories: Machine with stainless steel basket, drainage, lid, movable castors.

 

Ultrasonic Cleaner for Car Parts / Fuel Injector Cleaning Production :

 

 Rust Removing Ultrasonic Machine From Metallic Parts Asted Parts / Gun Parts 0

 

Contact Details
AGsonic

Phone Number : +8618928856885

WhatsApp : +8618928856885