Material: | Sus304/316 | Frequency: | 28KHZ |
---|---|---|---|
Heater: | 20-80℃ Adjustable | Basket: | Layered Design For Different Cleaning |
Automatic: | Bearings Engine Ultrasonic | Sovent Recycle: | Filter System |
Use: | Ultrasonic Parts Washer | Cleaning Typer: | Automotive Cleaning |
High Light: | ultrasonic carburetor cleaning machine,large ultrasonic parts cleaner |
Bearings Engine Ultrasonic Parts Washer With Filtration System Remove Contaminated With Debris Chips From Parts
Welcome to Engine parts cleaning - Engine Parts Cleaning, Car Engine Parts Cleaning, Truck Engine Parts Cleaning, Motor Bike Engine Parts Cleaning.
The Engine Parts division specialises in the Ultrasonic Cleaning of Engine Parts, Car engine parts, Truck engine parts and Motor bike engine parts to both trade customers and individuals .
Our Ultrasonic cleaning process, can effectively clean the following components- Aluminum castings, engine blocks, Carburetors, Cylinder Heads, Engines, Engine Components, Gear Boxes, Filters, Tubes and Valves.
AG Engine block ultrasonic cleaning machine are revolutionizing cleaning methods and processes on the automotive and mechanic shop floor, our Engine block ultrasonic cleaning machine can clean all kinds of automotive, aircraft, and marine engine parts, ultrasonic technology for cleaning parts eliminates manual labor while providing you with superior cleaning action, most parts can be cleaned with environmentally friendly water-based solutions
How is Engine Ultrasonic cleaning machines work
Ultrasonic cleaning machines work on the principle of agitating cleaning solvents using high frequency sound waves, the ultrasonic agitation creates millions of microscopic bubbles that implode releasing vast quantities of energy, this action, know as cavitations, dislodges any contaminant stuck to the surface of a part, ultrasonic cavitations thoroughly cleans every surface in contact with the cleaning fluid
AGSONIC ultra sonic cleaning of all parts old and new prior to assembly of the engine. This Ultrasonic Cleaning Method is long known as the "benchmark" in cleaning. Ultrasonic cavitation is able to clean right down to the surface of a part and beyond. It is also able to reach internal areas, which are not accessible by using other cleaning means including spray and mechanical agitation. The forceful nature of ultrasonic energy provides the physical "push" required to break the mechanical and ionic bonds that hold very small particles to surfaces.
Ultrasonic Cleaning of Engine Parts, Car engine parts, Truck engine parts and Motor bike engine parts
Our Ultrasonic cleaning process, can effectively clean the following components- Aluminum castings, engine blocks, Carburetors, Cylinder Heads, Engines, Engine Components, Gear Boxes, Filters, Tubes and Valves.
Cleaning With Sound Waves
While it may still sound futuristic to children of the ’60s and ’70s, ultrasonic cleaning has a long history of successful cleaning. Ultrasonics is the science of sound waves above the frequency normally considered audible for humans (above 18 Kilohertz). When vibrations at these high frequencies are introduced into liquids, areas of extremely high vacuum and extremely high pressure are generated alternately at any given point in the liquid as the sound waves pass.
Ultrasonic sound waves have been found to be an effective way to clean many automotive components, especially areas where it is difficult to reach with mechanical devices on complex parts such as automatic transmission parts, aluminum engine components with small oil galleys, blind holes and hidden cavities. Under the influence of a vacuum, the liquid is literally torn apart to create what is called a cavitation bubble. As positive pressure replaces the vacuum, which formed the cavitation bubble, it collapses in implosion resulting in high-pressure shock waves that, in turn, do all the work of scrubbing the component free from contaminants. Ultrasonic cleaning systems work very well on baked-on carbons and oils.
Model: T-1640S details:
Model | T-1640S (Power adjustable, separate generator) |
Capacity | 5250 liter |
Tank size | 3500×1500×100mm (LxWxH) |
Unit size | 3800×1700×1200cm (LxWxH) |
Packaging size | 3900x1800x1800mm (wooden case) |
Ultrasonic power | 32KW |
Heating power | 60W |
Timer | 1~99hours adjustable |
Heater | 20~80C adjustable |
Frequency | 40,000Hz |
Power supply | AC220V, AC 380V, 50/60 Hz, 3phase |
Tank material | SUS304, 2mm thickness |
Shell Material | SUS304, 1mm thickness |
Others | With drainage, basket, lid |
N.W./ G.W. | 216KG/287KG |
Warranty | 1 year& tech support for life |
Single tank models for your choice:
Model | Tank size | Unit size | Volume | Ultrasonic power | Frequency | Heating power | Timer | Heating temperature |
LxWxH(mm) | LxWxH(mm) | (L) | (W) | (kHz) | (KW) | (MIN) | (℃) | |
T-12S | 500x300x250 | 640x440x470 | 38 | 600 | 28/40 | 1.5 | 1-99 |
0-80 |
T-18S | 500x350x350 | 640x490x570 | 61 | 900 | 1.5 | |||
T-24S | 550x400x400 | 690x540x620 | 88 | 1200 | 3 | |||
T-30S | 600x450x400 | 740x590x620 | 108 | 1500 | 3 | |||
T-36S | 600x500x450 | 740x640x670 | 135 | 1800 | 4.5 | |||
T-48S | 700x500x500 | 840x640x720 | 175 | 2400 | 6 | |||
T-60S | 800x600x550 | 940x740x770 | 264 | 3000 | 7.5 | |||
T-72S | 1000x600x600 | 1140x740x820 | 360 | 3600 | 9 |
Engines Industrial Ultrasonic Cleaner With Filtration system
The Engine Parts division specialises in the Ultrasonic Cleaning of Engine Parts, Car engine parts, Truck engine parts and Motor bike engine parts to both trade customers and individuals throughout the world
Our Ultrasonic cleaning process, can effectively clean the following components- Aluminum castings, engine blocks, Carburetors, Cylinder Heads, Engines, Engine Components, Gear Boxes, Filters, Tubes and Valves.
Benefits of ultrasonics for engine part :
Ultrasonic Engine Cleaning remove oil , dirty ,Perfect cleaning effect !
Why choose ultrasonic cleaning machine to clean our engine block and engine parts?
Clean intricate and difficult to reach areas easily
A major challenge of any cleaning system is the difficulty faced in tackling tiny spaces, intricate geometries, and difficult to reach surfaces, ultrasonic cleaning penetrates even blind holes and small apertures, that previously had hit-and miss success rates, the uniform agitation of the cleaning solution ensures that the cleaning action penetrates even hard to reach areas that previously required specialized brushes and other complicated cleaning devices with no real guarantee of a successful and consistent cleaning outcome, various factors go into determining which combination of an ultrasonic unit and chemical solution is suited to your particular requirement
For effective cleaning the ultrasonic cleaning machine must use the right of cleaning chemistry, operate at the right temperature and use the correct frequency, the part to be cleaned the contaminant to be removed and the degree of soil, determine this, our years of experience advising manufacturing and maintenance clients on the right process for their cleaning needs help us identify the exact product combo that you need, just send AG SONIC email or call us, and we’ll guide you to the right solution quickly
Competitive Advantage:
FAQ:
Q:What are the advantages of AGsonic ultrasonic cleaner over traditional cleaning methods?
A:1.minimize the use of manual labor
· 2.make cleaning and degreasing without the use of organic solvents
· 3.clean hard to reach areas of products and remove all types of dirt
·4.shorten the processes such as extraction, dispersion, purification, chemical reactions
·5. eliminates costly mechanical and chemical cleaning of heat exchangers
aluminum heads Cleaning .
The cleaning technique (or combination of methods) you use should leave the heads and block free of dirt, grease, carbon and lime deposits. Residual carbon deposits that are still clinging to combustion chambers or exhaust ports can be brushed or blasted away, but that requires additional manual labor (which should be avoided to minimize your cleaning costs).
The cosmetic appearance of the metal doesn’t matter until the final post-machining cleaning has been completed and the block and heads are ready to be assembled, painted and/or bagged and returned to the customer. Bagging is highly recommended to keep out dirt while parts are being stored and transported.
Engine cylinder Head Cleaning :