|Ultrasonic Cleaning Tank
|Ultrasonic Rinsing Tank
|Hot Air Drying Tank
|Oil Filter System
ultrasonic medical instrument cleaner,
medical ultrasonic cleaning machine
Heated Ultrasonic Cleaning Scalpel, Scissors Up to Hollow Body Instruments
Guidance of AG ultrasonic cleaner:
1. For small parts cleaning, we have 2-30L betchtop standard models in stock;
2. For larger parts cleaning, we have 38-360L industrial standard models in stock;
3. For very large parts cleaning, customized tank size is welcome.
4. If need, rinsing tank, drying tank and oil filter system are available.
Any special requirements are welcome and engineer will design the machine according to your requirements.
Introduction about the ultrasonic cleaner:
Hospitals and other medical facilities contain a wide variety of tools and equipment that must be maintained in a completely sanitary or sterile condition. This is a critically important factor not only for patient wellness and recovery, but for the safety of both the patients and staff. While maintaining such environments has always been challenging, incomplete or improper cleaning can result in residual contamination leaving patients and staff exposed to viruses, bacteria, and other pathogens (such as MRSA). In recent years this has become a critical healthcare issue.
AG Ultrasonic Cleaning Systems have been used successfully in the cleaning and maintaining of medical facilities. With AG Ultrasonics, equipment can be cleaned quickly and thoroughly. Additionally, our systems have been proven to eradicate the most resistant bacteria including Escherichia coli, Enterococcus, H1N1, MRSA and C-diff.
In every case of testing, the AG Ultrasonic Cleaning Systems and process proved to be extremely effective at reducing the bacterial level of contamination for a wide variety of objects. For both Enterococcus and Escherichia coli, lab results revealed a 100% reduction for every non-porous item tested, a 97% reduction in Enterococcus and a 100% reduction of E. coli for porous items such a microfiber cleaning towel.
MRSA bacteria were completely eliminated from all contaminated surfaces. The results also conclusively proved that AG Ultrasonic Cleaning Equipment can be used to clean items with substantial bacterial contamination (and this was accomplished without having to frequently change the water in the cleaning tank). Special waste disposal requirements were also not necessary for the wash water after items with bacterial contamination had been cleaned.
|Specifications for ultrasonic cleaner AG-2072
|360L each tank
|1000x600x600mm each tank
|1140x740x820mm each tank
|3600W each tank
|9KW each tank
|External generator, more stable
|Oil filter system, pneumatic lift, rinsing tank, etc.
|110V, 1phase; 220V, 3phases/220V, 1phase; 380V, 3phases
Q: What is the duration of time cleaning?
A.: Cleaning time will vary, depending on factors such as soil, solution, the degree of cleanliness
Q.: What is the purpose of the unit heater?
A.: The primary purpose of the unit heater is to maintain the solution temperature between cleaning cycles. The tremendous energy released by cavitation generates heat for cleaning.