Automobile Industry Use Ultrasonic Cleaning Equipment For Auto Parts Car Parts Bolts Nut
Ultrasonic Technology Helps In Effective Cleaning of Rust Off Metal Tools?
You may be wondering about how does ultrasonic sound wave help?
Sound Wave technology is today one of the most popular ways of cleaning items such as rusted tools in homes as well as in industries.
These ultrasonic waves create high and low pressure in the water wherein your tools will be put in liquid or cleaning solvent. With this low and high pressure caused due to varied frequency the dirt particles breaks-up making your tools clean from rust and dirt.
Ultrasonic waves are used for cleaning other metal objects too in a similar way. So, if you are worried about your tools getting old with time, you should definitely try ultrasonic cleaning for keeping them young for another 10 years. Do not forget to follow the other basic steps (mentioned above) to ensure that it remains safe for the rest of your life.
Some of the hand tools are your most prized possession which you must have inherited from your fathers. Also if you have bought them yourself; make sure that you pass it on to the next generation in the best conditions.
AGSONIC ultrasonic cleaners are revolutionizing cleaning methods and processes on the automotive and mechanic shop floor. Our ultrasonic cleaners clean all types of automotive, aircraft, and marine engine parts. Ultrasonic technology for cleaning parts eliminates manual labor while providing you with superior cleansing action. Most parts can be cleaned with environmentally friendly water-based solutions.
Ultrasonic cleaners work on the principle of agitating cleaning solvents using high frequency sound waves. This ultrasonic agitation creates millions of microscopic bubbles that implode releasing vast quantities of energy. This action, known as cavitation, dislodges any contaminant stuck to the surface of a part. Ultrasonic cavitation thoroughly cleans every surface in contact with the cleaning fluid.
Ultrasonic cleaners can be especially effective for cleaning metal and plastic machinery and parts. Every ultrasonic cleaning system features heavy duty, all stainless steel construction. The solid, sturdy structure and high tech design make our ultrasonic parts washers the best in the business.
We also design and manufacture custom systems for unique applications and can provide components to convert or upgrade an existing tank. Whether you need a system to clean bearings or ceramics, ophthalmic precision lenses or mechanical manufacturing assemblies, we have a system that provides you with results.
laboratory ultrasonic cleaner, including High Frequency Desk-top Lab Ultrasonic Cleaner, Low Frequency Desk-top Lab Ultrasonic Cleaner with Heater and Low Frequency Desk-top Lab Ultrasonic Cleaner.
Automobile Industry Use Ultrasonic Cleaning Equipment For Auto Parts Car Parts Bolts Nut
Our digital series of auto part car part ultrasonic cleaner is eqquiped with LED digital readouts of timer as well as temperature controller. The machines comes with micro-processor based ultrasonic generator which is installed within the cleaning machines thereby saving a lot of space and making it a benchtop cleaning applicaion machines.
Our digital medical ultrasonic cleaner holds upto- 25-30 liers of water capcity and can Clean all types of surgical instuments within 3-5 minutes of applications. The machine is very handy and easy to operate and come with a stainless steel mesh basket. We use SS body for all our machines makes.
Product Description
Will An Ultrasonic Cleaner Remove Rust?
If you have tried all these methods and are still disappointed then ultrasonic cleaners for cleaning the rust from metal tools would be your last resort. This is one of the best technological inventions that would help in getting the dirt, rust and grime off your antic tools in a very effective and affordable manner.
Benefits of cleaning Medical Device with an ultrasonic cleaner
• The process reaches parts of the Medical Device that are extremely difficult to clean with traditional cleaning methods.
Medical Device gets completely clean, leaving it looking brand new.
• No need to disassemble the jewelry.
• Multiple pieces can be cleaned at once, saving time and money. Follow manufacturer recommendations for maximum pieces in your ultrasonic cleaner.
• Gentle cleaning does not damage delicate pieces and allows for cleaning as often as necessary.
Steps to cleaning Lab Device with an ultrasonic cleaner
1. Fill chamber with cleaning solvent
2. Note that water must be hot. Ideally, you would use an ultrasonic cleaner with a heater.
3. Run a pre-cleaning cycle
4. Submerge Medical Device into cleaning solvent
5. Run the cleaning cycle
6. After the cycle is complete, remove the items from the parts basket and rinse the solution from the items
7. After rinsing brush the pieces with a soft-bristled brush. Paying special attention to brushing around the claws and crowns that hold the gemstones or diamonds in place.
8. Complete with a final rinse. Place the jewelry in water only and dry with a soft cloth once rinse cycle is complete.
Digital Lab Ultrasonic Cleaner
Our digital series of medical ultrasonic cleaner is eqquiped with LED digital readouts of timer as well as temperature controller. The machines comes with micro-processor based ultrasonic generator which is installed within the cleaning machines thereby saving a lot of space and making it a benchtop cleaning applicaion machines.
Our digital medical ultrasonic cleaner holds upto- 25-30 liers of water capcity and can Clean all types of surgical instuments within 3-5 minutes of applications. The machine is very handy and easy to operate and come with a stainless steel mesh basket. We use SS body for all our machines makes.
Q. "Will ultrasonic cleaning remove the contaminants on my parts?"
A. The answer to this question relies almost entirely on the bond strength between the part, and the contaminant. If the contaminant has no physical or chemical bond to the surface, then ultrasonic cleaners will capable of removing it. However, if the contaminant has a strong bond to the part, such as that found with burned carbons, then a detergent must be selected which will have the ability to loosen the bond to a degree where the ultrasonic cleaner can easily remove it. This is why the use of proper cleaning fluids is so important in the ultrasonic cleaner.
Product specifications:
| Model |
Tank size |
Unit size |
Volume |
Actual ultrasonic power |
Rated ultrasonic power |
Ultrasonic frequency |
Heating power |
Timer |
Heating temperature |
| LxWxH(mm) |
LxWxH(mm) |
(L) |
(W) |
(W) |
(kHz) |
(W) |
(MIN) |
(℃) |
| TB-50 |
150x135x100 |
175x160x210 |
2 |
50 |
60 |
40 |
150 |
1-30 |
0-80 |
| TB-100 |
240x135x100 |
265x165x220 |
3.2 |
100 |
120 |
150 |
| TB-150A |
300x150x100 |
325x180x225 |
4.5 |
150 |
180 |
300 |
| TB-150B |
300x150x150 |
325x180x280 |
6.5 |
150 |
180 |
300 |
| TB-200 |
300x240x150 |
325x265x280 |
10.8 |
200 |
240 |
450 |
| TB-300 |
330x300x150 |
360x325x285 |
15 |
300 |
360 |
450 |
| TB-400 |
500x300x150 |
530x325x285 |
22 |
400 |
480 |
600 |
| TB-500 |
500x300x200 |
530x325x325 |
30 |
500 |
600 |
600 |
Your message must be between 20-3,000 characters!
