|Clean:||Ultrasonic Stencil Cleaners||Tank Capacity:||108L|
|Basket:||Have||Cleaning Process:||Solvent Cleaning|
|Use:||Cleaning And Degreasing|
industrial ultrasonic cleaning machine,
industrial ultrasonic cleaning tanks
High Power Ultrasonic Stencil Cleaners with Thermostat Rinsing Tank Optional
All of our Ultrasonic Stencil Cleaners are designed and manufactured completely in China by the highly qualified engineers and technicians of AG SONIC. These Ultrasonic Stencil Cleaners utilize the strength and gentleness of ultrasonic technology to give your stencils a powerful clean without damaging them. We have Ultrasonic Stencil Cleaners that range in function from PCB stencil cleaners to stencil tube cleaners.
The AG SONIC Ultrasonic Stencil Cleaner utilizes precisely controlled ultrasound waves to remove un-reflowed solder paste and uncured adhesives from stencils, screens, and misprints. The ultrasonic energy is gentle and will not damage delicate parts, but it is highly effective in the removal of even dried pastes on fine-pitch stencils.
Water level INDICATOR: shuts down the machine if the water level drops below the minimum requirement to avoid damage.
The AG SONIC Ultrasonic Stencil Cleaner has two ULTRASONIC tanks; a wash tank and a rinse tank. Both tanks have ultrasonic energy and heat. The wash tank filters the water and reuses it to eliminate discharge and to prolong the wash solution's life.
The transducers are surface mounted running at 40 kHz 2400 watts of raw ultrasonic power. The transducers have a ten year limited warranty against de-bonding. The warranty of this machine is 2 years.
Why clean parts with ultrasonic?
Delivering and using clean parts is not always obvious, certainly, no one wants to handle a dirty parts or install it into a critical machine, but, dirty, debris and contaminants can cause problems for manufactures and end users, from the merely frustrating to catastrophic, dirty parts can cause critical components to exceed tolerances and even fail damaging valuable equipment and property while contamination (everything from grease, oil and chemicals to viruses and bacteria) can seriously harm users.
Machining manufacture and repair companies can rely on ultrasonic cleaning technology to remove dirt and contamination from various brass, stainless steel, aluminum, ceramic, and plastic components with tiny areas that manual cleaning can’t reach. Ultrasonic cleaning is far faster, more thorough, and more cost-effective than traditional cleaning methods.
We know that the cleanliness of the parts you process reflects on your business and reputation. Count on us to provide the tools, training, and support you need to maximize your production and profitability.
Ultrasonics can clean:
|Specifications for ultrasonic cleaner T-30S|
|Tank material||2mm SUS304|
|Control||External generator, more stable|
|Optional||Oil filter system, pneumatic lift, rinsing tank, etc.|
|Voltage||110V, 1phase; 220V, 3phases/220V, 1phase; 380V, 3phases|
Frequently Asked Questions:
How do I get the best ultrasonic cleaning?
There are many considerations important to ultrasonic cleaning. Optimizing these variables will produce the best cleaning. The most important decisions to be made are choosing the proper cleaning solution, cleaning at the right temperature for the correct amount of time, and choosing the right size and type of ultrasonic cleaner.
Can ultrasonic cleaning damage my parts?
With certain cautions, ultrasonic cleaning is considered safe for most parts. While the effects of thousands of implosions per second is very powerful, the cleaning process is safe since the energy is localized at the microscopic level. The most important cautionary consideration is the choice of cleaning solution. Potentially adverse effects of the detergent on the material being cleaned will be enhanced by the ultrasonics. Ultrasonic cleaning is not recommended for the following gemstones: opal, pearl, emerald, tanzanite, malachite, turquoise, lapis and coral.
What is direct and indirect cleaning?
Direct cleaning occurs when the parts are cleaned in a cleaning solution which fills the cleaner, usually inside a perforated tray or mesh basket. The limitation of direct cleaning is that a solution must be chosen that will not damage the ultrasonic cleaner. Indirect cleaning involves placing the parts to be cleaned in an inner non-perforated tray or beaker that often contains a solution that the user may not want directly filling the ultrasonic tank. When choosing indirect cleaning, make sure that the water level inside the tank itself is maintained to the fill line (about 1″ from the tank top) at all times.
Why is a special solution required for cleaning?
Soils adhere to the parts… if they didn’t, the soil would just fall off the parts! The purpose of the solution is to break the bonds between parts and their soils. Water alone has no cleaning properties. The primary purpose of the ultrasonic activity (cavitation) is to assist the solution in doing its job. An ultrasonic cleaning solution contains various ingredients designed to optimize the ultrasonic cleaning process. For example, increased cavitation levels result from reduced fluid surface tension. An ultrasonic solution will contain a good wetting agent or surfactant.
Rinsing tank is optional: