|Material:||Stainless Steel 304||Option:||Turbine Fuel Nozzle|
|Frequency::||Ultrasonic Parts Cleaner 30L||Timer::||1-30Minutes|
30L Industrial Ultrasonic Cleaner,
Carburetor Industrial Ultrasonic Cleaner,
500W ultrasonic fuel injector cleaner
40KHz Industrial Ultrasonic Parts Cleaner 30L Tanks For Turbine Fuel Nozzle Oil Filter
Large Capacity 30L Industrial Ultrasonic Cleaner For Carburetor / Pistons Cleaning
Auto Parts Cleaning machine
We are manufacturing and supplying of Automotive Ultrasonic Cleaners. We offer a wide range of ultrasonic cleaners. These are Single or Multistage Ultrasonic Cleaners, which are both manually operated & fully automated systems. Further, the machine is widely used and appreciated by our clients due to its professional dependability and user friendliness.
Marine Ultrasonic cleaners
The range of Ultrasonic cleaners is a proven efficient way to fit in with modern shipboard due to highly effective cleaning results with little manual intervention.The cleaners are made from Stainless Steel 304, delivered complete with a SS basket and lid. Heating and temperature controls are built on.
Ultrasonic cleaning works on the principle of cavitation.
High frequency sound waves are generated and introduced in the cleaning liquid as mechanical energy through a series of transducers fitted on the outside bottom of the Mini Tank and radiating upwards.
The process of ultrasound creates numerous tiny vacuum bubbles
on the cleaning solution, which consequently implode. The energy released when tiny bubbles implode on the surface of the parts exposed to the cleaning solution causes an extremely effective cleaning force to the surface of the parts.
As the temperature of the cleaning solutions is directly related to the cavitational effect of the ultrasonic energy the Ultrasonic cleaners are delivered with built-in electrical heating elements complete with thermostatic controls. In this way an optimum combination of cleaning product (solution), temperature and ultrasonic power can be reached.
Ultrasonic cleaning uses sound waves to create millions of small bubbles in a tank of cleaning solution. The parts to be cleaned are submerged in the solution and as the bubble are formed and “explode” they remove any dirt, grease, carbon etc. This method also works very well. The one disadvantage that I noticed with ultrasonic cleaning is that aluminum parts do not come out of the cleaning tank looking like new. They seem to have some discoloration to them even though they were clean. If you are going to paint the parts then this shouldn't matter.
An ultrasonic injector cleaner and injector flow bench.
The preferred method of cleaning injectors. Cycles the fuel injectors while the fuel injector tips are immersed in an ultrasonic bath, which uses an environmentally friendly cleaning fluid to clean the fuel injectors. The flow bench portion also allows a user to perform a flow test before and after cleaning, and it allows the user to observe the fuel injector spray pattern. This method requires that the fuel injectors be removed from the engine
How do I get the best ultrasonic cleaning?
There are many considerations important to ultrasonic cleaning. Optimising these variables will produce the best cleaning. The most important decisions to be made are choosing the proper cleaning solution, cleaning at the right temperature for the correct amount of time, and choosing the right size and type of ultrasonic cleaner.
Is a special solution required for cleaning?
Soils adhere to the parts... if they didn't, the soil would just fall off the parts! The purpose of the solution is to break the bonds between parts and their soils. Water alone has no cleaning properties. The primary purpose of the ultrasonic activity (cavitation) is to assist the solution in doing its job. An ultrasonic cleaning solution contains various ingredients designed to optimise the ultrasonic cleaning process. For example, increased cavitation levels result from reduced fluid surface tension. An ultrasonic solution will contain a good wetting agent or surfactant.
Industrial Ultrasonic Parts Cleaner
Using aqueous (water based) detergents, AGSONIC ultrasonic equipment effectively removes oil, swarf and other contaminants from machine parts, tooling, jigs, tubes and many others. This maximises throughput, increasing productivity and eliminating needs for re-cleans, which makes it one of the most effective and environmentally friendly ways for cleaning these parts and components.
applications including the following and more:
Automotive Maintenance, Rebuilding and Restoration
Flood, Fire and Storm Damage Cleanup
Metallic and Ceramic Filter Cleaning
Printing Equipment Maintenance
General Maintenance Cleaning in Shop Environments
Medical Precision Cleaning
30l Ultrasonic cleaner Specifications:
|Ultrasonic Frequency||40,000 Hz|
|Ultrasonic Power||500 W|
|Heating power||600W strong power, quick heating|
|Unit Size||530 x 325 x 325 mm ( L x W x H )|
|Tank Size||500 x 300 x 200 mm ( L x W x H )|
|Package Size||635 x 405 x 390 mm ( L x W x H )|
|Power Supply||AC 100 ~ 120V, 50 / 60Hz
AC 220 ~ 240V, 50 / 60 Hz
Features of the machine:
•Low maintainence machine
•Heavy duty cleaning systems
•Chemical friendly- SS Rust proof body
•Industrial guage farication, build to last
•One year warrenty on any manufacturing defect
•Completely customized to suit the cleaning requirement
•Less human interfearance and less scope of error
•Accurate and uniform cleaning everytime